Home design can begin with room functions, spatial relationships, and furniture dimensions. While floor plans facilitate layout discussions, structural details and the feasibility of modifications require verification against original documentation; schematic wall lines should not be treated as a direct basis for demolition or alteration.

How to read a floor plan: Start by identifying orientation, doors/windows, and dimensions
Review the legend, north arrow, scale, and units of measurement first, then identify the entrance, windows, columns, utility shafts, and room boundaries. "Width" (span) and "depth" describe horizontal and longitudinal dimensions; interpret specific directions according to the drawing's notes. Verify both the structural ceiling height and the actual interior clear height. Promotional floor plans lacking dimensions are useful for understanding spatial relationships but are unsuitable for directly purchasing custom furniture.
What needs to be verified regarding the home's construction and structural elements?
Load-bearing walls, non-load-bearing walls, beams, columns, and utility lines are elements that must be identified before remodeling a floor plan. Do not judge whether a wall can be demolished based solely on colors, line weights, or AI recognition results; even if a wall is non-load-bearing, it may involve utility lines or other constraints. During layout discussions, mark areas to "keep as is" and areas "to be verified" before proceeding with spatial planning.
Improve daily usability by separating active and quiet zones, as well as wet and dry areas.
Zoning for activity vs. quiet areas focuses on potential disturbances between entertaining, cooking, and sleeping zones; public vs. private zoning considers whether visitors must pass through private areas; and wet vs. dry zoning looks at the relationship between water-use areas and other activity spaces. Interior layouts need not rigidly separate every function; instead, consider the family's daily routine, existing doors and windows, and room sizes when discussing the practical impact of each layout choice.
From 2D floor plan editing to 3D spatial preview
Experiment with the placement of walls, doors, windows, and furniture using the Space Between 2D editor, then view the layout in 3D. Save key designs, export them in a compatible JSON format, and share specific areas for discussion. Previews help visualize spatial relationships but do not constitute a completed architectural design, construction drawings, or structural analysis.
Example: compare two layouts without removing walls
Suppose a living room serves both guests and home working. Option A places the desk beside a window; option B places it against an internal wall. Keep walls, doors and windows unchanged, use the same measured furniture dimensions in both plans, and mark the chair when pulled out and the route to the balcony. Compare daytime glare, the background for video calls and interruptions from people passing. Leave unknown conditions for an on-site trial: fitting an object into a 3D plan does not establish comfort in use.
Keep a comparison record you can check later
For each option, record the problem it solves, the trade-off it introduces and the information still missing. For example: “Clears the entrance route but removes one storage unit; check afternoon glare on the window-side desk.” Retain the original plan and measurement date, and give exported files distinct option names. Use these changes as the basis for the next discussion instead of judging only a rendered image.